Friday, May 07, 2010
The optimal solution for large-format components in the aerospace industry as well as in wind power plant construction and vehicle manufacturing – this is where the portal WARICUT® HD waterjet cutting system can demonstrate its full potential and high precision. To achieve a maximum of flexibility, each high portal system can be individually equipped with several 2D and/or 3D cutting head axes. Several bridges for simultaneous processing are also possible.
WARICUT in new dimensions:
High portal system HWPV 32050/2-3D with 2 bridges and one 3D cutting head each
Monday, September 05, 2011
The first WARICUT waterjet cutting system produced by us returns to Hamm for overhaul after more than 20 years.
Monday, January 02, 2012
Start of the restructuring of the internal production process
Monday, Februar 13, 2012
Commissioning of a Trumpf press brake and an Amada guillotine shear, each with 4,000 mm working width, for internal production.
Monday, March 05, 2012
Commissioning of an automatic Kasto high-bay warehouse for raw material and an automatic band saw for internal production.
Monday, June 04, 2012
Cutting in XXL format – Energy supply systems for 3D waterjet cutting systems
With a travel path of 32 meters (x-axis) by 5 meters (y-axis), the double 3D waterjet cutting system, which H.G.RIDDER Automatisierungs-GmbH designed and built for the new plant of the Anssems group, has considerable dimensions. The same applies to the energy supply systems. They create an important prerequisite for the precise movement of the two 3D cutting heads on the portal axes.
Monday, September 03, 2012
Start of construction of production hall 3 with 1,900 sqm additional production area, including 40 tons crane capacity.
Wednesday, October 03, 2012
Press report about the WARICUT waterjet cutting system at BAE:
Waterjet cutter comes to the fore
The installation of a new Ridder Waricut waterjet profiling machine is helping to slash production cycle times at BAE Systems, Samlesbury.
“The Ridder machine has been excellent, it went straight in to production and worked, and has done everything we have asked it to do.”
Tuesday, October 23, 2012
EuroBLECH 2012 – Presentation of the new WARICUT 3D drilling unit for 3D carbon processing.
Thursday, May 02, 2013
Extensive expansion of our WARICUT spare parts offer in the E-Shop on ridder.de
Monday, June 17, 2013
Completion of production hall 3 with 1,900 sqm additional production area, including 40 tons crane capacity.
Thursday, August 14, 2014
Our apprentice – Mr. Ingo Steinmeier, apprenticeship year 2010 – has completed his training as an energy electronics technician in our company with great success. Mr. Steinmeier is one of the 110 best apprentices of his year who completed their IHK final examination in NRW with the grade “very good”.
Friday, January 02, 2015
We wish you all a happy and successful new year 2015!
Wednesday, January 28, 2015
New video on You Tube!
WARICUT waterjet cutting machine in 3D cutting mode:
3D water jet cutting of a stainless steel dished boiler end (D=1100mm) on a
WARICUT HWE-P2030 water jet cutting machine.
WARICUT waterjet cutting on You Tube
Wednesday, February 11, 2015
New video on You Tube! WARICUT micro-max – the original! Since 2010, the high-precision micro waterjet cutting systems from the WARICUT product line of H.G. RIDDER bear this protected name and lead 2D and 3D waterjet cutting (micro-waterjet cutting) into new dimensions. Abrasive nozzles can be used from diameter 0.2mm to 1.0mm on this waterjet machine! micro-max = micro and macro abrasive cutting as well as pure water cutting! (more machine details at the end of the film or on request) Optional: 3D cutting head, 4000 or 6000bar, electrical collision sensor, height scanning, WARICUT desludging system, pre-drilling axis, pipe cutting axis, basin cooling, suction system, clamping systems as desired, 3D radio measuring sensor, and much more. Of course, any other 2D or 3D WARICUT waterjet cutting machine can also be used for micro cutting at any time by retrofitting.
WARICUT Waterjet Systems – Micro waterjet cutting with the WARICUT micro-max – the original!
Tuesday, February 24, 2015
The two apprenticeship positions advertised for August 2015 as energy electronics technician and company fitter have been awarded. We would like to thank all applicants for their interest in our company, together with our best wishes for a successful apprenticeship!
Friday, March 06, 2015
We have added a new chapter to our new WARICUT brochure: WARICUT RETROFIT.
Since 1991, the RIDDERs have been building waterjet machines and to this day not a single RIDDER waterjet machine has landed on the scrap heap. Our machine quality is so outstanding that more and more buyers are deciding to have the old machine refurbished in our factory. So buying quality always pays off!
Monday, January 02, 2017
We wish you all a happy and successful new year 2017!
Friday, January 13, 2017
New RETROFIT used machine WARICUT HWM2015/1-2D available. The machine is currently undergoing a general overhaul. If you are interested, please contact us for further information or an offer.
WARICUT RETROFIT waterjet cutting machine: